Brief Introduction of Shield Fix It Foot:
Fix it Foot (Air Conditioning Vibration Isolating Rubber Pads) are of excellent capacity on vibration absorbing and noise reduction. They are made of highly elastic rubber. Their lifespan can reach 20 years after UV treatment. There is embedded groove design in the bottom of each items, which is convenient for leveling out, adjusts the height and increases anti-vibration capacity.While the Aluminum Channel is conducive to adjust the fixed hole sites. The replacement of original base and steel groove support would considerably save cost and time of installation. It only takes about ten minutes to install one equipment. Equipment can be placed on the roof or ground without damage water proof structure on the buildings.
Specification
 
Model  Dimension (mm)  
Aluminum Channel(mm)		  
Load(kg)		  
Weight(kg)
 Length Width  Height
JRF-400 400 160 90 370 350 8
JRF-450 450 160 90 410 450 10
JRF-600 600 160 90 560 600 13
JRF-1000 1000 160 90 960 800 20
JRF-450B 450 130 60 410 300 5
JRF-500B 500 130 60 460 300 5.5
Accessories JRF-250 1 fixed bolt and 2 air levels
Other  2 fixed bolts and 2 air levels
 

Select the right models:
1- Measure the distance between the two fixed holes back and front in the outer side of the machine.
2- Refer to the length of aluminum channel in the specification sheet to select the   appropriate model of fix it foot.
3- Make sure that the length of the aluminum channel is longer than that of the fixed hole distance.
 
    
Application:
Fix It Foot is mainly used in air conditioning, washing machine, duct and other machine, can protect the whole pipeline system, and effectively reduce noise
 
Installation Instruction:
Working Temperature: -40°C-80°C
Each Fix it foot is provide with screws to fit and 4 bubble level controls.